Category

Active filters

  • Saw: Lame Sabre
  • Packaging: Unit
  • Length: 150 mm
  • Width: 25 mm
CTR608MC1 - L. Sabre 150 mm

CTR608MC1 - L. Sabre 150 mm

Carbide blade for Saw Saw 8 Dents/Pouce. Geometry Triple Chip, Special High Resistance Metals. For the sawing of Inoxidable Aciers, Duplex and other dipped materials that a bimetal blade cannot cut
Availability: 10 In Stock
RBR662811T03 - RENOVATOR®

RBR662811T03 - RENOVATOR®

Bimétal blade for Saw Variable fine toothing 8/11 Dents/Pouce. Special Renovation. Body 25x1,6 mm very rigid that supports difficult conditions in the thin section cut (door anchoring and window). Thickness 8 to 20 mm
Availability: 10 In Stock
RBWP64210T05 - Power®

RBWP64210T05 - Power®

Bimétal blade for Saw Saw 10 Dents/Pouce. Hard work. Body 25x1,1 mm rigid for cuts requiring high pressure but a soft sawing in the hardest metals: Steel, Inoxidable, Fonte. Thickness 8 to 15 mm
Availability: 10 In Stock
RBWP64214T05 - Power®

RBWP64214T05 - Power®

Bimétal blade for Saw Saw Saw 14 Dents/Pouce. Hard work. Body 25x1,1 mm rigid for cuts requiring high pressure but a soft sawing in the hardest metals: Steel, Inoxidable, Fonte. Thickness 5 to 10 mm
Availability: 10 In Stock
RBWP64218T05 - Power®

RBWP64218T05 - Power®

Bimétal blade for Saw 18 Dents/Pouce. Hard work. Body 25x1,1 mm rigid for cuts requiring high pressure but a soft sawing in the hardest metals: Steel, Inoxidable, Fonte. Thickness 2 to 6 mm
Availability: 10 In Stock