Category

Active filters

  • Packaging: Unit
  • Denture: Standard
  • Thickness: 1.10 mm
  • Metals: Copper

M42 34x1.1 - 2/3 PR

Saw blade at Ruban 34x1.1 - 2/3 teeth. Denture M42 8% of Cobalt, dipped to 69HRc. Positive cut for sawing of steels and light alloys on controlled descent machine
Availability: 10 In Stock

M42 34x1.1 - 3/4 - VN

Saw blade at Ruban 34x1.1 - 3/4 teeth. Denture M42 8% of Cobalt, dipped to 69HRc. Straight cut for sawing of steels and light alloys, profiled and low thickness on controlled descent machine
Availability: 10 In Stock

M42 34x1.1 - 3/4 PR

Saw blade at Ruban 34x1.1 - 3/4 teeth. Denture M42 8% of Cobalt, dipped to 69HRc. Positive cut for sawing of steels and light alloys on controlled descent machine
Availability: 10 In Stock

M42 34x1.1 - 4/6 PR

Saw blade at Ruban 34x1.1 - 4/6 teeth. Denture M42 8% of Cobalt, dipped to 69HRc. Positive cut for sawing of steels and light alloys on controlled descent machine
Availability: 10 In Stock

M42 34x1.1 - 4/6 VN

Saw blade at Ruban 34x1.1 - 4/6 teeth. Denture M42 8% of Cobalt, dipped to 69HRc. Straight cut for sawing of steels and light alloys, profiled and low thickness on controlled descent machine
Availability: 10 In Stock

M42 34x1.1 - 5/7 PR

Saw blade at Ruban 34x1.1 - 5/7 teeth. Denture M42 8% of Cobalt, dipped to 69HRc. Positive cut for sawing of steels and light alloys on controlled descent machine
Availability: 10 In Stock

M42 34x1.1 - 5/8 VN

Saw blade at Ruban 34x1.1 - 5/8 teeth. Denture M42 8% of Cobalt, dipped to 69HRc. Straight cut for sawing of steels and light alloys, profiled and low thickness on controlled descent machine
Availability: 10 In Stock

M42 34x1.1 - 8/12 VN

Saw blade at Ruban 34x1.1 - 8/12 teeth. Denture M42 8% of Cobalt, dipped to 69HRc. Straight cut for sawing of steels and light alloys, profiled and low thickness on controlled descent machine
Availability: 10 In Stock

Matrix II 34x1.1 - 5/8 VN

Saw blade at Ruban 34x1.1 - 5/8 teeth. Denture Matrix II 8% of Cobalt, dipped to 66HRc. Straight cut for sawing of steels and light alloys, profiled and low thickness on manual descent machine
Availability: 10 In Stock

Matrix II 34x1.1 - 6/10 VN

Saw blade at Ruban 34x1.1 - 6/10 teeth. Denture Matrix II 8% of Cobalt, dipped to 66HRc. Straight cut for sawing of steels and light alloys, profiled and low thickness on manual descent machine
Availability: 10 In Stock

RBWP124210T05 - Power®

Bimétal blade for Saw Saw 10 Dents/Pouce. Hard work. Body 25x1,1 mm rigid for cuts requiring high pressure but a soft sawing in the hardest metals: Steel, Inoxidable, Fonte. Thickness 8 to 15 mm
Availability: 10 In Stock