Achiever 27x0.9 - 6/10 VN
Saw blade at Ruban 27x0.9 - 6/10 teeth. Denture 8% of Cobalt, dipped to 69HRc, Chrome reinforced fog. Straight cut for steel and stainless steel sawing in intensive production
Availability: 10 In Stock
Sawing
There are 9 products.
Active filters
Achiever 34x1.1 - 6/10 VN
Saw blade at Ruban 34x1.1 - 6/10 teeth. Denture 8% of Cobalt, dipped to 69HRc, Chrome reinforced fog. Straight cut for steel and stainless steel sawing in intensive production
Availability: 10 In Stock
M42 19x0.9 - 6/10 VN
Saw blade at Ruban 19x0.9 - 6/10 teeth. Denture M42 8% of Cobalt, dipped to 69HRc. Straight cut for sawing of steels and light alloys, profiled and low thickness on controlled descent machine
Availability: 10 In Stock
M42 27x0.9 - 6/10 VN
Saw blade at Ruban 27x0.9 - 6/10 teeth. Denture M42 8% of Cobalt, dipped to 69HRc. Straight cut for sawing of steels and light alloys, profiled and low thickness on controlled descent machine
Availability: 10 In Stock
Matrix II 13x0.65 - 6/10 VN
Saw blade at Ruban 13x0.65 - 6/10 teeth. Denture Matrix II 8% of Cobalt, dipped to 66HRc. Straight cut for sawing of steels and light alloys, profiled and low thickness on manual descent machine
Availability: 10 In Stock
Matrix II 13x0.90 - 6/10 VN
Saw blade at Ruban 13x0.9 - 6/10 teeth. Denture Matrix II 8% of Cobalt, dipped to 66HRc. Straight cut for sawing of steels and light alloys, profiled and low thickness on manual descent machine
Availability: 10 In Stock
Matrix II 19x0.9 - 6/10 VN
Saw blade at Ruban 19x0.9 - 6/10 teeth. Denture Matrix II 8% of Cobalt, dipped to 66HRc. Straight cut for sawing of steels and light alloys, profiled and low thickness on manual descent machine
Availability: 10 In Stock
Matrix II 27x0.9 - 6/10 VN
Saw blade at Ruban 27x0.9 - 6/10 teeth. Denture Matrix II 8% of Cobalt, dipped to 66HRc. Straight cut for sawing of steels and light alloys, profiled and low thickness on manual descent machine
Availability: 10 In Stock
Matrix II 34x1.1 - 6/10 VN
Saw blade at Ruban 34x1.1 - 6/10 teeth. Denture Matrix II 8% of Cobalt, dipped to 66HRc. Straight cut for sawing of steels and light alloys, profiled and low thickness on manual descent machine
Availability: 10 In Stock