Saw blade at Ruban 27x0.9 - 6 teeth. Denture M42 8% of Cobalt, dipped to 69HRc. Positive cut for sawing of steels and light alloys on controlled descent machine
Bimétal blade for Saw Saw 6 Dents/Pouce. Special for wood with metal inclusion (Clou). Body 20x0,9 mm rigid for a perfectly straight cut. Section 50 to 250 mm
Bimétal blade for Saw Saw 6 Dents/Pouce. Special for wood with metal inclusion (Clou). Body 20x1,3 mm very rigid for a perfectly straight cut. Section 50 to 250 mm
Bimétal blade for Saw Saw 6 Dents/Pouce. Special Deconstruction. 22x1.6 mm very rigid body that supports high pressures and difficult conditions. Ideal for dive cuts. Thickness 12 to 20 mm
Bimétal blade for Saw Saw 6 Dents/Pouce. Special for the Plaster. Body 20x1,3 mm very rigid and conical tooth for better disbursement. Cut of plaster tiles and spiders in dry partitions
Bimétal blade for Saw Saw 6 Dents/Pouce. Special for wood with metal inclusion (Clou). Body 20x1,3 mm very rigid for a perfectly straight cut. Section 30 to 100 mm
Bimétal blade for Saw Saw 6 Dents/Pouce. Special Deconstruction. 22x1.6 mm very rigid body that supports high pressures and difficult conditions. Ideal for dive cuts. Thickness 12 to 20 mm
Bimétal blade for Saw Saw 6 Dents/Pouce. Special for wood with metal inclusion (Clou). Body 20x1,3 mm very rigid for a perfectly straight cut. Section 30 to 150 mm
Bimétal blade for Saw Saw 6 Dents/Pouce. Special Deconstruction. 22x1.6 mm very rigid body that supports high pressures and difficult conditions. Ideal for dive cuts. Thickness 12 to 20 mm
Bimétal blade for Saw Saw 6 Dents/Pouce. Special Industrial Tuylist using machines with U-shaped Attachment. Very rigid body allowing straight cuts. Thickness 12 to 20 mm
Saw blade at Ruban 19x0.8 - 6 teeth. Denture Carbone C45, soaked at 64HRc. Flexible back for curved cuts. Positive cut for sawing of soft materials of high thickness
Saw blade at Ruban 13x0.65 - 6 teeth. Denture Carbone C45, soaked at 64HRc. Rigide back for straight cuts. Straight cut for the sawing of light alloys and soft materials of low thickness
Bimétal blade for Saw Lace 6 Dents/Pouce. High resistance blade for straight cut in profiled metal or sheet metal and wood with metal inclusion (clous). Thickness 12 to 20 mm
HCS Carbon Thread for Saw 6 Dents/Pouce. Ame amincie, for cutting Curviligne and Chantournage in wood, soft materials Plastics, Rubber, non-ferrous metals. Thickness 10 to 50 mm