FCHA001 - Kit F. Chanfreiner
Box of 6 Strawberries to Chanfreiner FCHA including Ø6,3-8,3-10,4-12,4-16,5 and 20.5 mm. Allows to lower and make 90° chamfers to drown strawed screw heads in dfficiles steels
Availability: Out of stock
Category
There are 235 products.
Active filters
- Covering: TiAlN
FCHA063 - F. Chanfreiner - Ø6,3
Strawberry to Chanfreiner HSS Revêtu TiAln DIN 335C Peeled Cut Rectified 3 Lips to lower and hench at 90° a hole up to Ø6,3 mm. 5 mm keel. Ideal for drowning strawberry screw heads in tough steels
Availability: Out of stock
FCHA083 - F. Chanfreiner - Ø8,3
Strawberry to Chanfreiner HSS Revêtu TiAln DIN 335C Peeled Cut Rectified 3 Lips to lower and hench at 90° a hole up to Ø8.3 mm. 6 mm keel. Ideal for drowning strawberry screw heads in tough steels
Availability: Out of stock
FCHA104 - F. Chanfreiner - Ø10,4
Strawberry to Chanfreiner HSS Revêtu TiAln DIN 335C Peeled Cut Rectified 3 Lips to lower and hench at 90° a hole up to Ø10.4 mm. 6 mm keel. Ideal for drowning strawberry screw heads in tough steels
Availability: Out of stock
FCHA124 - F. Chanfreiner - Ø12,4
Strawberry to Chanfreiner HSS Revêtu TiAln DIN 335C Peeled Cut Rectified 3 Lips to lower and hench at 90° a hole up to Ø12.4 mm. 8 mm keel. Ideal for drowning strawberry screw heads in tough steels
Availability: Out of stock
FCHA165 - F. Chanfreiner - Ø16,5
Strawberry to Chanfreiner HSS Revêtu TiAln DIN 335C Peeled Cut Rectified 3 Lips to lower and hench at 90° a hole up to Ø16.5 mm. 10 mm keel. Ideal for drowning strawberry screw heads in tough steels
Availability: Out of stock
FCHA205 - F. Chanfreiner - Ø20,5
Strawberry to Chanfreiner HSS Revêtu TiAln DIN 335C Peeled Cut Rectified 3 Lips to lower and hench at 90° a hole up to Ø 20.5 mm. 10 mm keel. Ideal for drowning strawberry screw heads in tough steels
Availability: Out of stock
FCHA250 - F. Chanfreiner - Ø25,0
Strawberry to Chanfreiner HSS Revêtu TiAln DIN 335C Peeled Cut Rectified 3 Lips to lower and hench at 90° a hole up to Ø25 mm. 10 mm keel. Ideal for drowning strawberry screw heads in tough steels
Availability: Out of stock
FCHA310 - F. Chanfreiner - Ø31,0
Strawberry to Chanfreiner HSS Revêtu TiAln DIN 335C Peeled Cut Rectified 3 Lips to lower and hench at 90° a hole up to Ø31 mm. 12 mm keel. Ideal for drowning strawberry screw heads in tough steels
Availability: Out of stock
FCOA001 - Box F. Conique
Set of 3 FCOA Conical Forets including Ø3/14-6/20 and 16/30. Enlarge an existing hole. Diameters are laser marked on the lip. Use in sheet metal up to 2 mm. Recommended for tough steels
Availability: 10 In Stock
FCOA163 - F. Conique - Ø16/30
Foret Conique Meulé Meulé Rectified Revêtu TiAln 2 Lips Goujure Right Case Double Geometry Queue 10 mm. Enlarge a hole from Ø16 to 30 mm. Laser-marked diameters on the lip. Use in sheet metal up to 2 mm
Availability: 10 In Stock
FCOA264 - F. Conique - Ø26/40
Foret Conique Meulé Meulé Rectified Revêtu TiAln 2 Lips Goujure Right Case Double Geometry Quue 12 mm. Enlarge a hole from Ø26 to 40 mm. Laser-marked diameters on the lip. Use in sheet metal up to 2 mm
Availability: 10 In Stock
FCOA314 - F. Conique - Ø3/14
Foret Conique Meulé Meulé Rectified Revêtu TiAln 2 Lips Goujure Right Case Double Geometry Queue of 6 mm. Enlarge a hole from Ø3 to 14 mm. Laser-marked diameters on the lip. Use in sheet metal up to 2 mm
Availability: 10 In Stock
FCOA620 - F. Conique - Ø6/20
Foret Conique Meulé Meulé Rectified Revêtu TiAln 2 Lips Goujure Right Case Double Geometry Queue 8 mm. Enlarge a hole from Ø6 to 20 mm. Laser-marked diameters on the lip. Use in sheet metal up to 2 mm
Availability: 10 In Stock
FCOA630 - F. Conique - Ø6/30
Foret Conique Meulé Meulé Rectified Revêtu TiAln 2 Lips Goujure Right Case Double Geometry Queue 10 mm. Enlarge a hole from Ø6 to 30 mm. Laser-marked diameters on the lip. Use in sheet metal up to 2 mm
Availability: 10 In Stock
FEDA001 - Foret Box
Set of 3 Forets Egged FEDA including Ø4/12-4/20 and 6/30. Allows to make a hole or enlarge it to the exact coast. Use in sheet metal up to 2 mm without pre-drilling. Recommended for tough steels
Availability: 10 In Stock
FEDA012 - Foret Etagé - Ø4/12
Foret Etagé Taillé Meulé Rectified Revêtu TiAln 2 Lips Goujure Straight, 6 mm tail for screwdriver. 9 Wings of Ø4 to 12 mm in step 1. Use in sheet metal up to 2 mm without pre-drilling required, automatic damping of hole
Availability: 10 In Stock
FEDA020 - Foret Etagé - Ø4/20
Foret Etagé Taillé Meulé Rectified Revêtu TiAln 2 Lips Goujure Straight, 8 mm tail for screwdriver. 9 Wings of Ø4 to 20 mm in step 2. Use in sheet metal up to 2 mm without pre-drilling required, automatic damping of hole
Availability: 10 In Stock
FEDA030 - Foret Etagé - Ø6/30
Foret Etagé Taillé Meulé Rectified Revêtu TiAln 2 Lips Goujure Straight, 10 mm tail for screwdriver. 13 Wings of Ø6 to 30 mm in step 2. Use in sheet metal up to 2 mm without pre-drilling required, automatic damping of hole
Availability: 10 In Stock
FEDA040 - Foret Etagé - Ø30/40
Foret Etagé Taillé Meulé Rectified Revêtu TiAln 2 Lips Goujure Straight, 12 mm tail for drill. 11 Wings of Ø30 to 40 mm in steps of 1. Use in sheet metal up to 2 mm with pre-drilling, automatic damping of hole
Availability: 10 In Stock
FEDA050 - Foret Etagé - Ø40/50
Foret Etagé Taillé Meulé Rectified Revêtu TiAln 2 Lips Goujure Straight, 12 mm tail for drill. 11 Wings of Ø40 to 50 mm in steps of 1. Use in sheet metal up to 2 mm with pre-drilling, automatic damping of hole
Availability: 10 In Stock
FEDA060 - Foret Etagé - Ø50/60
Foret Etagé Taillé Meulé Rectified Revêtu TiAln 2 Lips Goujure Straight, 13 mm tail for drill. 11 Wings of Ø50 to 60 mm in steps of 1. Use in sheet metal up to 2 mm with pre-drilling, automatic damping of hole
Availability: 10 In Stock
FEHA001 - Foret Box
3-Forets EFHA box comprising Ø4/12-4/20 and 6/30. Allows to make a hole or enlarge it to the exact coast. Use in sheet metal up to 2 mm without pre-drilling and without deformation. Essential for Electricians
Availability: 10 In Stock
FEHA012 - Foret Etagé - Ø4/12
Foret Etagé Taillé Meulé Rectified Revêtu TiAln 2 Lips Goujure Hélicoïdale, tail of 6 mm. 9 Wings of Ø4 to 12 mm in step 1. Use in sheet metal up to 2 mm without pre-scan and without deformation, automatic de-scanting of hole
Availability: 10 In Stock